Blog post February 21st 2024

Van Repair Guides WeBuyBrokenVans Updates

How to Change the Brake Discs and Pads on Your Van (2017 Ford Transit Custom)

How to Change the Brake Discs and Pads on Your Van (2017 Ford Transit Custom)

How to Change the Brake Discs and Pads on Your Van (2017 Ford Transit Custom): Ever feel your van’s brakes aren’t quite right? You’re not alone.

This guide will walk you through how to change the brake discs and pads on your 2017 Ford Transit Custom. You’ll gain the confidence to tackle this important maintenance task.

Remember, you’re not just keeping your van in top shape, you’re ensuring the safety of everyone you’re driving.

Let’s get those hands dirty and make a real difference in your van’s performance!

Understanding the Importance of Brake Maintenance

How to Change the Brake Discs and Pads on Your Van (2017 Ford Transit Custom)While you might think it’s just a mundane task, maintaining your van’s brakes can significantly enhance your vehicle’s performance and safety.

It’s not just about changing the oil or checking the tire pressure; it’s also about ensuring your brake discs and pads are in top shape.

If you own a Ford Transit Custom, you should know how crucial brake maintenance is. Remember, it’s not just about you. It’s about the safety of those you serve.

So, don’t hesitate to replace worn-out brake discs. Pads replacement is equally important, especially for the front brake.

The process to change the brake discs might seem daunting, but it’s an integral part of keeping your transit custom running smoothly and safely.

Preparing Your 2017 Ford Transit Custom for Brake Disc and Pad Replacement

Before you get started on the actual replacement, you’ll need to properly prepare your 2017 Ford Transit Custom, and this involves a few crucial steps. This preparation will ensure a smooth brake disc and pad replacement process, helping you serve your van’s needs efficiently.

Firstly, make sure your Ford Transit Custom is parked on a level surface. This ensures that the van remains stable throughout the replacement process.

Secondly, loosen the lug nuts on your tires before jacking up your van. This will make removing the tires easier when you’re ready to replace the brake discs and pads.

Lastly, have all necessary tools ready. This includes a jack, lug wrench, and the new brake discs and pads.

Keep in mind that preparing thoroughly can make the replacement process smoother and safer.

Tools and Materials Needed for the Job

You’ll need a specific set of tools and materials for the job of changing the brake discs and pads on your 2017 Ford Transit Custom. This isn’t a massive task, but it’s essential to have the correct items to ensure a smooth job. Let’s review what you’ll need:

Tools/MaterialsPurposeQuantity
JackTo lift the van1
WrenchTo remove bolts1
New brake discsReplacement parts for your van2
New brake padsReplacement parts for your van4
Pry barTo remove old brake discs and pads1

With these tools and materials in hand, you’re ready to change your brake discs and pads on your 2017 Ford Transit Custom van. Always remember, your commitment to serving others starts with maintaining a safe and efficient vehicle.

Steps to Remove the Old Brake Discs and Pads

After gathering all the necessary tools, it’s time for you to start removing the old brake discs and pads from your Transit Custom van. To ensure a smooth and effective repair, it’s always best to follow a step-by-step guide. Consider checking out video tutorials online, especially if it’s your first time doing this type of maintenance. Having a mechanic supervise the process is also a great idea if you’re unsure.

Here’s a basic outline of what you’ll need to do:

  • Loosen the front brake pads and extract them carefully.
  • Remove the rear brake discs. Remember, these might be a bit stuck due to wear and tear.
  • Clean the area thoroughly before installing the new parts.

This way, you’re not just caring for your van, but serving those who’ll ride in it too.

Installing the New Brake Discs: A Detailed Guide

Having prepared your workspace and gathered all necessary tools, you’re now ready to begin the process of installing the new brake discs on your Ford Transit Custom. Start by positioning the new disc on the hub. Afterward, mount it on the axle, ensuring it’s properly aligned and secure.

Next, let’s focus on replacing the pads. Carefully place the new brake pads into the caliper. Make sure they’re firmly seated and the retaining clips are in place.

Here’s a simple table summarizing the process:

StepTaskKey Point
1Position disc on hubEnsure proper alignment
2Mount disc on axleCheck security
3Replace pads

Seat firmly, check clips

 

How to Change the Brake Discs and Pads on Your Van (2017 Ford Transit Custom)

Proper Installation of the New Brake Pads

So, you’ve got your new brake pads ready, but before you install them, it’s crucial to clean the brake caliper bracket thoroughly, and don’t forget to apply a thin layer of brake grease on the back of the pads.

This Ford Transit guide is to help you in the proper installation of brake discs and pads.

Here are a few things to remember:

  • Ensure the brake pads are correctly aligned within the channel on the bracket.
  • Press the pads firmly into place, they should snugly fit into the vehicle’s brake caliper.
  • Connect the brake wear sensor wire, if your van has one.

This service is a critical aspect of maintaining your van’s safety. Follow this guide, and you’ll be on the road in no time.

Tips for Ensuring Your Brake System Is Functioning Properly

You’ll want to regularly check your brake system for any signs of wear or damage to ensure it’s working optimally. It’s crucial to keep an eye on the brake discs and pads of your van, especially after a change, to ensure they’re functioning properly.

Maintaining your 2017 Ford Transit Custom’s brake system not only keeps you safe, but it shows your commitment to serving others by keeping the roads safer. Here are a few tips:

  • Listen for any unusual noises when you brake
  • Check for any vibrations
  • Make sure your van doesn’t pull to one side when braking.

Routine Maintenance and Care for Your Van’s Brake System

How to Change the Brake Discs and Pads on Your Van (2017 Ford Transit Custom)How often are you performing routine maintenance and care on your van’s brake system? It’s essential to regularly check the pads and discs on your 2017 Ford Transit Custom. If you neglect this task, you could end up with a hefty garage bill or worse, a dangerous situation on the road.

To maintain your van’s brake discs and pads, consider these tips:

  • Regularly inspect your brake system for wear and tear.
  • Schedule a routine maintenance check-up every six months or as per your manufacturer’s guidelines.
  • Learn how to change the brake discs and pads on your van to save on garage costs and fix your car issues promptly.

Conclusion

So, you’ve successfully replaced the brake discs and pads on your 2017 Ford Transit Custom. Great job!

Remember, keeping your van’s brake system in top shape is crucial for your safety. Regular maintenance and care can help avoid future issues.

Don’t hesitate to consult a professional if you’re unsure about anything.

Now, your van is ready to hit the road again, and you can drive with confidence knowing your brakes are in perfect working order.